Modeling Wax Bone Color 1 oz. by Graftobian

This is the ideal wax for creating just about any facial addition: warts, broken nose, deep contusion, you name it. 

To use: 1) Apply Spirit  Gum to desired area where you want your wart, etc.  2) Tap Spirit Gum until tacky, usually a few taps with fingertip.  3) Roll wax into a ball in palm of hand and press onto tacky area, flaring out and shaping as desired.  Use a very small amount of make-up remover on your fingertip to smooth the wax once the shape is finished.  4) Powder down with face powder.  5) Seal the wax with either Wax Sealer or with Liquid Latex stippled on with a white foam wedge.  6) Allow to dry and repeat until you have a durable skin over the wax.  7) Apply your make-up, blood, etc.

Tips:

Apply Spirit Gum to the area. Tap out with finger until tacky

Press ball of Modeling Wax onto gummed area and shape as desired.

Use a small amount of Make-up Remover on your fingertip to smooth wax.  Using Setting Powder on the wax area at this point is optional but is helpful in absorbing excess moisture. Clean skin surrounding waxed area with an alcohol wipe so that the Wax Sealer applied in the next step will bond properly to the skin.

Paint several quick drying coats of Wax Sealer over wax area. You may now apply makeup, either creme-based or airbrush.

Note: Painting or stippling liquid latex over the wax works to create this protective layer as well but takes longer to dry.